Driver side torque box is out

Got more media blasting done, got the rest of the torque box out as well as the floor pan support. Separated the one piece torque box I bought and did sort of a test fit, fit is alright, will know better once I knock down where I used the spot weld cutter and any other weld areas and am ready to put it in.

Built a media separator out of a 5 gallon bucket, lid, 2x 2″ pvc street elbows, 2″ to 1.5″ reducer, and 2x 2″ rubber couplers. I’ll post some images up when I have a chance to take some! Works great to be able to suck up the used media and be able to filter and funnel back into the blaster to be reused.

Started piecing together the next sheet metal pieces I will need to order:

  • http://www.cjponyparts.com/quarter-panel-patch-premium-lower-rear-driver-side-1967-1968/p/XM200L/
  • http://www.cjponyparts.com/frame-patch-rt-front-at-bumper-brackets-1964-1970/p/M169R/ or http://www.cjponyparts.com/frame-rail-front-outer-passenger-side-1965-1970/p/M124R/
  • http://www.cjponyparts.com/floor-to-firewall-extension-1965-1970/p/M126-V/
  • http://www.cjponyparts.com/torque-box-1-piece-passenger-side-coupe-fastback-1965-1970/p/M117R/